Dynojet Quick Shifter Sensor (note you must be using a Dynojet PC3 for
this sensor to work, sensor only shift rod not included). Select from
"Push" + "Pull" + "Linear Pull" + "Linear Push" versions depending on
your bike's configuration and setup. We have the applications listed for
stock bikes below. Keep in mind if you are using reverse shipping you
will need to determine if a "Push" , "Pull" , "Linear Pull" or "Linear
Push" sensor is right for you. If you have any configuration questions
don't hesitate to contact us.
Normally during "up shifting" you must roll off of the throttle and pull
in the clutch in order to engage the next higher gear. In racing (both
drag and road race), split seconds count. Rolling off the throttle, even
slightly, slows your times and can be the difference between winning
and losing. The Dynojet Quick Shifter (DQS) allows full throttle, clutch
less shifting. This is done by momentarily cutting the fuel and or
ignition, which unloads the transmission. During this time, the rider
can shift up to the next gear without rolling off the throttle or using
the clutch. The Power Commander incorporates all of the Quick Shifter
functionality in with the main fuel controller and is fully
programmable*. No cutting or splicing of your bike's wiring harness is
necessary. The amount of "kill time" is adjustable by the user via the
provided software. The user can also set a minimum rpm for the system to
function. This keeps the system from activating at too low of an rpm,
such as low speed road riding.
Shift Rod Pressure / Tension Sensor - This universal sensor mounts
inline with the shift rod. The customer must provide the appropriate
"length and thread" shift rod. This sensor is available in both "push"
and "pull" styles depending on the direction the shift rod moves during
an up shift. NOTE: For most applications, a Shift Rod Kit is available
seperately contact us for details.
Linear Travel Sensor Kit - For applications where a bike does not have a
shift rod, or the Shift Rod Sensor will not fit, we offer a Linear
Travel Sensor. One end of this sensor is mounted to the shift lever
itself and the other to a fixed point on the chassis. This linear style
sensor is available in "push" or "pull" styles to suit all installations
needs. A universal mounting kit is included.
Stock Bike Configurations (keep in mind if reverse you change to a
reverse shifting setup the sensors listed below won't work):
Aprilia
- RSV Mille 04-08 :LINEAR PUSH Type
- Tuono 03-05 :LINEAR PUSH Type
Ducati
- 749 03-06 :LINEAR PUSH Type
- 848 2008 :PUSH Type
- 999 03-06 :LINEAR PUSH Type
- 1098 07-08 :PUSH Type
- 1098R 2008 :PUSH Type
- 1198 2009 :PUSH Type
Honda
- CBR 600rr F4i 01-06 :PUSH Type
- CBR 600rr 03-04 :PUSH Type
- CBR 600rr 05-06 :PUSH Type
- CBR 600rr 07-08 :PUSH Type
- CBR 929rr 00-01 :PUSH Type
- CBR 954rr 02-03 :PUSH Type
- RC51 00-01 :LINEAR PUSH Type
- RC51 02-06 :LINEAR PUSH Type
- CBR 1000rr 04-05 :PUSH Type
- CBR 1000rr 06-07 :PUSH Type
- CBR 1000rr 2008 :PUSH Type
Kawasaki
- ZX-6r 03-04 :PUSH Type
- ZX-6r 05-06 :PUSH Type
- ZX-6RR 2003 :PUSH Type
- ZX-6RR 2004 :PUSH Type
- ZX-6RR 05-06 :PUSH Type
- ZX-6r 07-08 :PUSH Type
- EX 650R 06-08 :LINEAR PUSH Type
- Z750 04-05 :LINEAR PUSH Type
- Z1000 03-06 :LINEAR PUSH Type
- ZX-10r 04-05 :PUSH Type
- ZX-10r 06-07 :PUSH Type
- ZX-10r 2008 :PUSH Type
- ZX-12r 00-01 :PUSH Type
- ZX-12r 02-03 :PUSH Type
- ZX-12r 04-05 :PUSH Type
- ZX-14r 06-07 :LINEAR PUSH Type
- ZX-14r 2008 :LINEAR PUSH Type
Suzuki
- GSX-R 600 01-03 :PUSH Type
- GSX-R 600 04-05 :PUSH Type
- GSX-R 600 06-07 :PUSH Type
- GSX-R 600 2008 :PUSH Type
- SV650 SV650S 03-06 :PUSH Type
- SV650 SV650S 07-08 :PUSH Type
- GSX-R 750 00-01 :PUSH Type
- GSX-R 750 02-03 :PUSH Type
- GSX-R 750 04-05 :PUSH Type
- GSX-R 750 06-07 :PUSH Type
- GSX-R 750 2008 :PUSH Type
- SV1000 03-04 :PUSH Type
- SV1000 05-07 :PUSH Type
- GSX-R 1000 01-02 :PUSH Type
- GSX-R 1000 03-04 :PUSH Type
- GSX-R 1000 05-06 :PUSH Type
- GSX-R 1000 07-08 :PUSH Type
- GSX-R 1300 Hayabusa 99-00 :LINEAR PUSH Type
- GSX-R 1300 Hayabusa 2001:LINEAR PUSH Type
- GSX-R 1300 Hayabusa 02-07 :LINEAR PUSH Type
- GSX-R 1300 Hayabusa 2008 :PUSH Type
- BKing 2008 :PUSH Type
Yamaha
- Road Star Warrior 02-08 :PUSH Type
- FZ6 04-08 :LINEAR PUSH Type
- R6 03-05 :PULL Type
- R6S 06-08 :PULL Type
- R6 06-07 :PULL Type
- R6 2008 :PULL Type
- R1 02-03 :PULL Type
- R1 04-05 :PULL Type
- R1 2006 :PULL Type
- R1 07-08 :PULL Type
